Photo coming soon
MITSUBISHI · Alternator
AlternatorIR/IFMITSUBISHI
11095
PIC203-474
Voltage
12V
Amperage
110A
Rotation
CW
6 interchanges3 applications8 components
Note:This is a 110A Mitsubishi Alternator for the 2004-06 Mitsubishi Galant (and Others) With the 2.4L Engine. This Unit Has 2 Bottom Mounts, a Top Mount at About 3:00, a 6-Groove Conventional Pulley, a B+ Terminal Using an Extension Pointing Up at 1:00, and the Plug (4-Pin; G-S-L-F) Out the Side at 2:00. Mitusbishi Motors Supersedes the 11095 (203-474) to the Later Version (Was 11095; Now 11118 - See Below), Which Has Protruding Mounts on the SRE Frame for a Heat Shield. In 9/2009 It Was Brought to Our Attention That The Later Version (203-487) of the 11095 Actually Has Protruding Mounts on the Rear for a Heat Shield, While the Earlier Version 11095 (203-474) Does Not. While it Appears Either Unit Can Be Used, the Heat Shield Will Only Attach if the Holes are Present. For That Reason, We are Amending That Version (203-487) of the 11095 and Re-Naming it the 11118.
Specifications
Full technical detail
- Type
- Alternator
- Manufacturer
- MITSUBISHI
- Design
- IR/IF
- Voltage
- 12V
- Amperage
- 110A
- Rotation
- CW
- Pulley Design
- S6
- Pulley Groove OD
- 0
- Plug Code
- 307
- Plug Clock
- 2:00
Vehicle applications
Fits 3 configurations
Domestic(3)
| Make | Model | Engine | Years |
|---|---|---|---|
| Mitsubishi(Car) | Eclipse | L4 2.4L 2378cc | 2006–2006 |
| Mitsubishi(Car) | Galant | L4 2.4L 2378cc | 2004–2006 |
| Mitsubishi(Car) | Galant | L4 2.4L 2351cc | 2004–2004 |
Component breakdown
Replacement parts that go inside this unit
| Component | Part numbers |
|---|---|
| Bearing, Ball | 5-2310 5-2312 5-4000 |
| Nut | 9500-1460 |
| Plug Code | 9801-307 |
| Pulley | 7900-1006 |
| Regulator & Brush Holder | 8003-3025 |
| Slip Ring, Rotor | 7103-12 |
| Stator | 7203-8357 |
| Test Lead, Alt | 9800-SHP |