BetaOnline orders aren't available yet. Contact sales@chargingsystemsinc.com for pricing & quotes.
CHARGING SYSTEMS
Photo coming soon
HITACHI · Alternator
AlternatorIR/IFHITACHI

13612

PIC204-317
Voltage
12V
Amperage
125A
Rotation
CW
9 interchanges2 applications20 components
Note:This is a 125A Version of the 110A 13639. Both Units Fit the Nissan Maxima, and the 13612 Also Fits the Infiniti I30. Early Versions of the 13612 Used a Third Terminal in the Plug ("C" Terminal), But This Was Superseded to a Later 13612 Unit That Dropped This Terminal. The Units Interchange. Nissan Has Recalled the 1997 (2/97 Thru 2/98) Maxima and Infiniti I30 (Recall #02V171000 - ITB99-034) With One or Both of the Alternators Used (See 13639) Because "One of the Diodes Used in the Alternator May Have Been Damaged When Built. This Can Eventually Result in Failure of the Diode and an Electrical Short Which Could Melt the Plastic Housing". The Recall Notice Goes on to Say That a Fire Could Result "If the Combustible Gas Emitted By the Melting Plastic Does Not Disperse (Properly)". It is Not Known Whether the 13612 is Involved, or if it is Just the 13639. Also, it is Critical That the Stators and Rear Housings on the 13612 and 13639 are NOT Mixed Up, as the Stator on the 13612 is Wider Tha the 13639, and There is a Different Bushing on the Rear Bottom Mounting Hole to Compensate, so the Distance Between the Inside of the Front and Inside of the Bushing (Which is Basically the Length of the Mounting Spool in the Vehicle) is 79mm. If the Stator and Rear Housings are Mixed Up at All, Then the Spacing May Vary, and There Could Be a Problem With Housings Breaking When the Units are Installed.

Specifications

Full technical detail

Type
Alternator
Manufacturer
HITACHI
Design
IR/IF
Voltage
12V
Amperage
125A
Rotation
CW
Pulley Design
S6
Pulley Groove OD
62
Plug Code
305
Plug Clock
2:00

Vehicle applications

Fits 2 configurations

Domestic(2)
MakeModelEngineYears
Infiniti(Car)I30V6 3.0L 2988cc 182cid1996–1997
Nissan(Car)MaximaV6 3.0L 2988cc 182cid1995–1997

Component breakdown

Replacement parts that go inside this unit

ComponentPart numbers
Bearing, Ball5-2710A 5-4700
Brush Holder Assy, Alt7404-4017
Capacitor8604-101
Cover, Alt8404-102 8404-111
Diode, Neg7704-104
Diode, Pos7704-105
Gasket, Alt9104-4006
Plug Code9801-305
Pulley7904-4014
Rectifier7704-1539
Reg, Rect Assy7704-1539A
Regulator & Brush Holder8004-1551
Regulator, Alt8004-1527
Repair Circuit, Regulator8104-414
Rotor7004-5040
Slip Ring, Rotor7104-13
Stator7204-9119
Terminal Kit, Batt, Alt9604-301A
Test Lead, Alt9800-SHP
Thru Bolt9604-501