1 / 5
13688
DENSOAlternatorIR/IF12V110ACW Rotation
Fits Mazda · 2.5L engine
7 interchanges2 applications24 components
Or call (405) 225-7220 · M–F 8–5 CT
Note:This NDenso 110A Alternator Fits the Mazda Millenia With the 2.5L Engine. This Unit Uses a 5-Groove Serpentine Pulley. The Later Version (90A - Smaller Case) is the 13759. This is Somewhat Similar to the 13687 Used on the Millenia With a 2.3L Engine, Except the Top Ear on This Unit is Directly Opposite the Bottom Mounts (Instead of Being Offset), and the Pulley is 5-G (Instead of 7-G). There is No Interchange Here. The 13759 is the 90A Version of This Unit.
Specifications
Full technical detail
- Type
- Alternator
- Manufacturer
- DENSO
- Design
- IR/IF
- Voltage
- 12V
- Amperage
- 110A
- Rotation
- CW
- Pulley Design
- S5
- Pulley Groove OD
- 55
- Plug Code
- 312
- Plug Clock
- 12:00
OEM part numbers
Genuine OEM & engine-manufacturer numbers this alternator replaces
Bosch Remanufactured
Denso
Vehicle applications
Fits 2 configurations
2 configurations
International(1)
| Make | Model | Engine | Years |
|---|---|---|---|
| Mazda - Europe Car(Europe Car) | Xedos 9 2500 | V6 | 1994–1998 |
Component breakdown
Replacement parts that go inside this unit
| Component | Part numbers |
|---|---|
| Bearing, Ball | 5-3514 5-5222 |
| Brush Holder Assy, Alt | 7490-9203 |
| Connector, Alt | 9990-1012 |
| Cover or Shield | 9290-9043 |
| Cover, Alt | 8490-9038 |
| Gasket, Alt | 9190-4708 |
| Grommet, Alt | 9190-4711 |
| Insulator, Alt | 9290-9500 |
| Nut | 9500-1451 9500-1505 9590-003 |
| Plug Code | 9801-312 |
| Pulley | 7990-9020 |
| Rectifier | 7790-4016 |
| Regulator, Alt | 8090-4418 |
| Repair Circuit, Regulator | 8190-919 |
| Retainer, Bearing, Alt | 8590-900 |
| Rotor | 7090-655 |
| Screw | 9690-9012 9690-9016 9690-9063 9690-9065 |
| Seal, Alt | 9190-4713 |
| Slip Ring, Rotor | 7190-904A |
| Stator | 7290-8503 |
| Stud, Alt | 9690-9003 |
| Test Lead, Alt | 9800-NT |
| Thru Bolt | 9690-9009 |
| Washer, Spring | 9890-9030 |