BetaOnline orders aren't available yet. Contact sales@chargingsystemsinc.com for pricing & quotes.
CHARGING SYSTEMS
Photo coming soon
HITACHI · Alternator
AlternatorIR/IFHITACHI

13826

PIC204-4032C, 204-4032B, 204-316B, 204-316A, 204-4032, 204-4032A
Voltage
12V
Amperage
110A
Rotation
CW
24 interchanges15 applications49 components
Note:The 13639 May Very Well Interchange, According to Some in the Field Who Have Tried This. | This 110A Alternator Was Seen on the 2003-04 Infiniti I35. The LR11110-720 and LR1110-723 Appear to Be the Same Unit. The 13639 May Very Well Interchange, According to Some in the Field Who Have Tried This. | TWO PIN PLUG, 6 GROOVE CONVENTIONAL PULLEY, 63MM PULLEY OD. | This is a 110A Version of the 125A 13612. Both Units Fit the Nissan Maxima and Infiniti I30. Nissan Has Recalled the 1997 (2/97 Thru 2/98) Maxima and Infiniti I30 With One or Both of the Alternators Used (Recall #02V171000 - See 13612) Because "One of the Diodes Used in the Alternator May Have Been Damaged When Built. This Can Eventually Result in Failure of the Diode and an Electrical Short Which Could Melt the Plastic Housing". The Recall Notice Goes on to Say That a Fire Could Result "If the Combustible Gas Emitted By the Melting Plastic Does Not Disperse (Properly)". Also, it is Critical That the Stators and Rear Housings on the 13612 and 13639 are NOT Mixed Up, as the Stator on the 13612 is Wider Than the 13639, and There is a Different Bushing on the Rear Bottom Mounting Hole to Compensate, so the Distance Between the Inside of the Front and Inside of the Bushing (Which is Basically the Length of the Mounting Spool in the Vehicle) is 79mm. If the Stator and Rear Housings are Mixed Up at All, Then the Spacing May Vary, and There Could Be a Problem With Housings Breaking When the Units are Installed. | This is a 110A Hitachi Alternator for the 2000-01 Infiniti I30 and Nissan Maxima. This Unit Has a 6-Groove Pulley. The 13639 May Very Well Interchange, According to Some in the Field Who Have Tried This. | This is a 110A Hitachi Alternator for the 2002 Infiniti I35 and Nissan Maxima With the 3.5L Engine. The LR11110-720 and LR1110-723 Appear to Be the Same Unit, as Does the 13826. The 13639 May Very Well Interchange, According to Some in the Field Who Have Tried This.

Specifications

Full technical detail

Type
Alternator
Manufacturer
HITACHI
Design
IR/IF
Voltage
12V
Amperage
110A
Rotation
CW
Pulley Design
S6
Pulley Groove OD
0
Plug Code
306
Plug Clock
2:00

Vehicle applications

Fits 15 configurations

Domestic(12)
MakeModelEngineYears
Infiniti(Car)I30V6 3.0L 2988cc 182cid2000–2001
Infiniti(Car)I30V6 3.0L 2988cc 182cid1998–1999
Infiniti(Car)I35V6 3.5L 3498cc2004–2004
Infiniti(Car)I35V6 3.5L 3498cc2003–2004
Infiniti(Car)I35V6 3.5L 3498cc2002–2003
Nissan(Car)MaximaV6 3.5L 3498cc2002–2003
Nissan(Car)MaximaV6 3.0L 2988cc 182cid2000–2000
Nissan(Car)MaximaV6 3.0L 2988cc 182cid1998–1999
Nissan(Truck)MuranoV6 3.5L 3498cc2004–2009
Nissan(Truck)MuranoV6 3.5L 3498cc2003–2003
Nissan(Van)UrvanL4 2.4L 2389cc2002–2007
Nissan(Van)UrvanL4 2.4L 2389cc2000–2000
International(3)
MakeModelEngineYears
Nissan(Europe Car)MAXIMA / MAXIMA QX IV (A32)Eng.VQ20DE 2.0 103kw VQ20DE1995–2000
Nissan(Europe Car)MAXIMA / MAXIMA QX IV (A32)Eng.VQ30DE 3.0 142kw VQ30DE1995–2000
Nissan(Europe Car)MURANO I (Z50)Eng.VQ35DE 3.5 4x4 172kw VQ35DE2004–2008

Component breakdown

Replacement parts that go inside this unit

ComponentPart numbers
Bearing, Ball5-2710 5-4700
Bearing, Ball5-2802 5-4700
Bearing, Ball5-2710A 5-4700
Bearing, Ball5-2710 5-4700
Brush Holder Assy, Alt7404-4017
Brush Holder Assy, Alt7404-4017
Brush, Alt7304-2412
Cover, Alt8404-102
Cover, Alt8404-102
Cover, Alt8404-102 8404-111
Cover, Alt8404-102
Cover, Alt8404-102 8404-111
Gasket, Alt9104-4006
Insulator, Alt9204-4003
Nut9500-1460
Plug Code9801-306
Plug Code9801-306
Plug Code9801-306
Plug Code9801-306
Plug Code9801-306
Pulley7900-1006
Pulley7904-4014
Pulley7904-4014
Pulley7900-1006
Pulley7900-1006
Rectifier7704-1550
Rectifier7704-1550
Rectifier7704-1550
Regulator & Brush Holder8004-1551
Regulator & Brush Holder8004-1551
Regulator & Brush Holder8004-1551
Rotor7004-463
Rotor7004-463
Rotor7004-463
Rotor7004-463
Rotor7004-463
Slip Ring, Rotor7104-13
Slip Ring, Rotor7104-13
Stator7204-9144
Stator7204-9111
Terminal Kit, Batt, Alt9604-301A
Terminal Kit, Batt, Alt9604-301A
Test Lead, Alt9800-SHP
Test Lead, Alt9800-SHP
Test Lead, Alt9800-SH
Test Lead, Alt9800-SHP
Test Lead, Alt9800-SHP
Thru Bolt9604-501
Thru Bolt9604-501