1 / 8
17466
DENSOStarterOSGR12V1.4 kWCW Rotation10-Tooth
Fits Dodge, Plymouth, Case/IH, Chrysler and Massey Ferguson · 3.9L, 5.2L, 5.9L engines
12 interchanges101 applications29 components
Or call (405) 225-7220 · M–F 8–5 CT
Note:This is the Later, Shorter Version of the 17084 Chrysler Starter, HOWEVER This Unit is Used in the Dodge Trucks, AND Has a "Cut-Out" in the Drive Pinion Area, So Most All of the Pinion Gear Itself is Exposed, Rather Than the Older 17084 Version Where Only the Pinion Teeth Were Exposed. Reports are That This "Cut-Out" is Needed For Proper Fit. Although the 17084 Will NOT Fit in Place on the 17466, It is Probable that the 17466 WILL Fit in Place of the 17084.
Specifications
Full technical detail
- Type
- Starter
- Manufacturer
- DENSO
- Design
- OSGR
- Voltage
- 12V
- Rotation
- CW
- kW
- 1.4
- Tooth Qty
- 10
- Mounting Type
- FLANGE
- Mounting Config
- B
- Mounting Holes
- 2
- Ground
- G
OEM part numbers
Genuine OEM & engine-manufacturer numbers this starter replaces
Bosch Remanufactured
Denso
Vehicle applications
Fits 101 configurations
Showing 40 of 101 configurations
Domestic(40)
| Make | Model | Engine | Years |
|---|---|---|---|
| Case/IH | 1010 | 1966–1971 | |
| Case/IH | 1060 | 1966–1971 | |
| Case/IH | 1160 | 1961–1970 | |
| Case/IH | 960 | 1961–1971 | |
| Chrysler | 300 | 1962–1966 | |
| Chrysler | Newport | 1965–1971 | |
| Chrysler | Town & Country | 1963–1971 | |
| Dodge | 330 | 1963–1964 | |
| Dodge | 440 | 1963–1964 | |
| Dodge | 880 | 1962–1965 | |
| Dodge | A100 | 1964–1966 | |
| Dodge | A100 Truck | 1964–1970 | |
| Dodge | A108 Van | 1967–1970 | |
| Dodge | B150 | 1991–1994 | |
| Dodge | B1500 | 1995–1995 | |
| Dodge | B250 | 1991–1994 | |
| Dodge | B2500 | 1995–1995 | |
| Dodge | B350 | 1991–1994 | |
| Dodge | B3500 | 1995–1995 | |
| Dodge | Challenger | 1970–1973 | |
| Dodge | Charger | 1966–1973 | |
| Dodge | Coronet | 1963–1973 | |
| Dodge | D100 Pickup | 1968–1971 | |
| Dodge | D100 Series | 1962–1967 | |
| Dodge | D150 | 1991–1993 | |
| Dodge | D200 Pickup | 1968–1969 | |
| Dodge | D200 Series | 1962–1967 | |
| Dodge | D250 | 1991–1993 | |
| Dodge | D300 Pickup | 1968–1969 | |
| Dodge | D300 Series | 1962–1967 | |
| Dodge | D350 | 1991–1993 | |
| Dodge | Dakota | 1991–1995 | |
| Dodge | Dart | 1962–1971 | |
| Dodge | Lancer | 1962–1962 | |
| Dodge | Monaco | 1965–1971 | |
| Dodge | P100 | 1965–1968 | |
| Dodge | P100 Van | 1967–1967 | |
| Dodge | P200 | 1965–1969 | |
| Dodge | P300 | 1965–1969 | |
| Dodge | Polara | 1962–1969 |
Component breakdown
Replacement parts that go inside this unit
| Component | Part numbers |
|---|---|
| Armature, Str | 5090-3200 |
| Ball, Steel, Str | 6990-9900 |
| Boot, Str | 9290-9033 |
| Brush Holder Assy, Str | 5590-9001 |
| Brush, Str | 5490-3209 |
| Bushing, Str | 6-28592 |
| Coil, Soln | 6790-9519 |
| Contact & Plunger Assy | 6790-9023 |
| Contact Set, Stationary | 6790-944 |
| Cover, Soln | 6790-215 |
| Cover, Str | 6990-9001 |
| Drive, Str | 6190-2617 |
| Field Case Assy, Str | 5290-9003 |
| Frame, CE, Str | 5790-1001 |
| Gasket, Soln | 9190-9009 |
| Gear, Str | 6990-9608 |
| Nut | 9590-004 |
| O-Ring | 9190-9038 9190-9052 |
| Pinion, Str Drive | 6290-2613A |
| Repair Kit, Str | 6990-850 |
| Retainer, Str | 6990-136 |
| Roller, Str | 6990-135 |
| Screw | 9690-9004 9690-9006 |
| Spring, Brush, Str | 9490-9002 |
| Spring, Plunger, Str | 6790-9133 |
| Terminal Block, Str | 6790-6181 |
| Terminal, Soln | 6790-9107 |
| Thru Bolt | 9650-5500 |
| Tube, Drain, Str | 9190-9031 |