1 / 7
17896
DENSOStarterOSGR12V1.4 kWCW Rotation13-Tooth
Fits Dodge, Chrysler and Chevrolet · 2.7L, 3.6L, 5.7L, 6.1L engines
6 interchanges28 applications15 components
Or call (405) 225-7220 · M–F 8–5 CT
Note:This is a Denso Starter for the 2005-On Chrysler 300 and Dodge Magnum With the 5.7L Hemi Engine. There May Be a Mitsubishi Version of This Unit (M0T21071ZC) Also (?) The Differences Between the 17896 and 19030 (Used on the 6.1L Engine) are That the Ignition Terminal for the 17896 is at 3:00 (Pointing Forwards) When Viewing the Unit From the Rear, and the Battery Stud is at 4:00 (Pointing Outwards to the Right), While the 19030 Has the Ignition Terminal at 7:00 (Pointing to the Rear), and the Battery Stud at 4:00 (Pointing to the Rear). The DE Frame and Pinion May Be the Same Between the Two Units. Also, the 19030 Uses a Threaded Extension on the Rear of the Thru Bolt at 2:00 (From Rear) While the 17896 Does Not.
Specifications
Full technical detail
- Type
- Starter
- Manufacturer
- DENSO
- Design
- OSGR
- Voltage
- 12V
- Rotation
- CW
- kW
- 1.4
- Tooth Qty
- 13
- Mounting Type
- FLANGE
- Mounting Config
- C
- Mounting Holes
- 3
- Ground
- G
OEM part numbers
Genuine OEM & engine-manufacturer numbers this starter replaces
Bosch Remanufactured
Denso
Vehicle applications
Fits 28 configurations
28 configurations
Domestic(25)
| Make | Model | Engine | Years |
|---|---|---|---|
| Chevrolet Truck(Truck) | Captiva Sport | V6 3.6L 3564cc 217cid | 2010–2010 |
| Chrysler | 300 | 2005–2014 | |
| Chrysler | 300 | 5.7L/345CI V8 | 2005–2014 |
| Chrysler | 300 | 5.7L/345CI V8 | 2009–2012 |
| Chrysler | 300 | 5.7L/345CI V8 | 2006–2008 |
| Chrysler | 300 | 6.1L/370CI V8 | 2005–2005 |
| Chrysler Car(Car) | 300 | V8 5.7L 345cid | 2005–2014 |
| Chrysler Car(Car) | 300 | V8 6.1L 6059cc 370cid | 2005–2005 |
| Dodge | Challenger | 2009–2023 | |
| Dodge | Challenger | 5.7L/345CI V8 | 2009–2015 |
| Dodge | Challenger | 5.7L/345CI V8 | 2009–2011 |
| Dodge | Charger | 2006–2021 | |
| Dodge | Charger | 5.7L/345CI V8 | 2006–2015 |
| Dodge | Charger | 5.7L/345CI V8 | 2009–2012 |
| Dodge | Charger | 5.7L/345CI V8 | 2007–2008 |
| Dodge | Magnum | 5.7L/345CI V8 | 2005–2008 |
| Dodge | Magnum | 2005–2008 | |
| Dodge | Magnum | 5.7L/345CI V8 | 2005–2008 |
| Dodge | Magnum | 6.1L/370CI V8 | 2005–2005 |
| Dodge | Magnum | 2.7L/167CI V6 | 2005–2005 |
| Dodge Car(Car) | Challenger | V8 5.7L 345cid VIN T; EZC | 2020–2023 |
| Dodge Car(Car) | Challenger | V8 5.7L 345cid | 2009–2019 |
| Dodge Car(Car) | Charger | V8 5.7L 345cid VIN T; EZH | 2020–2021 |
| Dodge Car(Car) | Charger | V8 5.7L 345cid | 2006–2019 |
| Dodge Car(Car) | Magnum | V8 5.7L 345cid | 2005–2008 |
International(3)
| Make | Model | Engine | Years |
|---|---|---|---|
| Chrysler - Europe Car(Europe Car) | 300 C (LX) | Eng.EZB, EZD, EZH 5.7 250kw "EZB, EZD, EZH" | 2004–2008 |
| Chrysler - Europe Car(Europe Car) | 300 C Touring (LX) | Eng.EZB, EZD, EZH 5.7 250kw "EZB, EZD, EZH" | 2004–2010 |
| Chrysler - Europe Car(Europe Car) | 300 C Touring (LX) | Eng.EZB, EZH 5.7 AWD 250kw "EZB, EZH" | 2005–2010 |
Component breakdown
Replacement parts that go inside this unit
| Component | Part numbers |
|---|---|
| Armature, Str | 5090-3200 |
| Bearing, Ball | 5-2204 5-4000 |
| Boot, Str | 9290-9033 |
| Brush Holder Assy, Str | 5590-9001 |
| Brush, Str | 5490-3208 |
| Collar, Stop, Str | 6290-2610C |
| Contact & Plunger Assy | 6790-9023 |
| Contact, Movable, Soln | 6790-7001 |
| Gasket, Soln | 9190-9009 |
| Insulator, Str | 9290-9018 |
| O-Ring | 9190-9052 |
| Pinion, Str Drive | 6290-2061 |
| Retaining Ring | 6290-2973C |
| Switch, Solenoid | 6690-9103 |
| Tube, Drain, Str | 9190-9031 |