Photo coming soon
FORD · Starter
StarterPMGRFORD
3234
PIC150-323
Voltage
12V
Power
1.5 kW
Rotation
CW
Teeth
10
13 interchanges7 applications23 components
Note:Motorcraft PMGR Starter. This Unit Looks Identical to the 3235, BUT FOR ONE VERY IMPORTANT DIFFERENCE. The Front Housing Casting Number is Located to the TOP RIGHT of the Nose Cone, and Reads "F2HU-11131-BA". This is in Contrast to the 3235, Which Has the Casting Number to the TOP LEFT of the Nose Cone. The Reason That These Two WILL NOT INTERCHANGE is That the Offset From the Mounting Ring Center to the Shaft Center Is DIFFERENT. This Causes Fit and Engagement Problems. Another Way to Say it is the 3234 and 3235 Look Identical to All But the Most Trained Eye, YET, The Drive End Housings WILL NOT Interchange in the Applications. Upon Close Inspection the 3234 Has About a 5 Degree or so Difference in the Angle of Opening (When Viewed Straight On and Focusing on the Position of the Bottom of the Opening in Relation to the Lower Mounting Hole) Than Does the 3235. An Easier Way to See it is to Compare the Position of the Left Most Nose COne Brace on Both Units in Relation to the Bottom Mounting Hole. The 3235 Has This Last Brace Further Left Than the 3234 (When Looking Straight On). The Top Mounting Ear is 11mm. The 6641 is the Same Unit, Except Using the Later Ignition "Stud" on the Solenoid, Rather Than the ?" Spade. Replacement 3234 Units May Come Equipped With Both an Ignition Stud and Attached Spade For Use as Either a 3234 or 6641.
Specifications
Full technical detail
- Type
- Starter
- Manufacturer
- FORD
- Design
- PMGR
- Voltage
- 12V
- Rotation
- CW
- kW
- 1.5
- Tooth Qty
- 10
- Mounting Type
- FLANGE
- Mounting Config
- B
- Mounting Holes
- 2
- Ground
- G
Vehicle applications
Fits 7 configurations
Domestic(7)
| Make | Model | Engine | Years |
|---|---|---|---|
| Ford(Medium/Heavy Truck) | B-600 | V8 7.0L 429cid Ford 7.0L(429) V8 Gas | 1998–1998 |
| Ford(Medium/Heavy Truck) | B-600 | V8 7.0L 429cid | 1992–1997 |
| Ford(Medium/Heavy Truck) | B-700 | V8 7.0L 429cid | 1992–1998 |
| Ford(Medium/Heavy Truck) | B800 Series | Ford 7.0L(429) V8 Gas | 1992–1998 |
| Ford(Medium/Heavy Truck) | F-600 | V8 7.0L 429cid | 1992–1994 |
| Ford(Medium/Heavy Truck) | F-700 | V8 7.0L 429cid | 1992–1998 |
| Ford(Medium/Heavy Truck) | F-800 | V8 7.0L 429cid | 1997–1998 |
Component breakdown
Replacement parts that go inside this unit
| Component | Part numbers |
|---|---|
| Ball, Steel, Str | 6950-5181 |
| Brush Holder Assy, Str | 5550-5301 |
| Commutator, Str | 5150-505 |
| Contact, Stationary, Soln | 9650-5614 |
| Cover, Str | 6950-5032 |
| Drive, Str | 6150-355 6150-355A |
| Field Case Assy, Str | 5250-5209 |
| Frame, CE, Str | 5750-150 |
| Frame, DE, Str | 5650-5012 |
| Gear, Planetary | 5850-5601 |
| Gear, Stationary | 5850-5500 |
| Grommet, Str | 9250-5032 |
| Nut | 9500-1464 |
| Retainer, Str | 9750-5007 |
| Retaining Ring, Str | 9750-5000 |
| Screw | 9650-5501 9650-5510 |
| Shaft, Planetary | 5150-5000 |
| Shift Lever | 6850-209 |
| Starter Kit | 9950-200 |
| Support, Shift Lever | 6850-210B |
| Switch, Solenoid | 6650-500 |
| Thru Bolt | 9650-5500 |
| Washer, Thrust | 9750-5017 |